[MAT logo][Prev][Up][Next]

ABEL I/O

The abel module communicates with the ABEL library for communication with AB PLC5 and similar. The library (but not the module) was written by Ron Gage.

Warning: the module has never been tested.

Its configuration is quite simple. Apart from the usual mapping table, it only has one parameter, IP, which gives the IP address of the PLC to be contacted.

In the mapping table, standard AB addresses are used, as supported by the ABEL library.

[Prev][Up][Next]

$Date: 2004/12/28 05:32:10 $